GU-INS Quad Copter inertial navigation system with GPS
Email to Friend
- Similar Products
GAUI GU-INS Quad Copter inertial navigation system with GPS 924500
GAUI GU-INS supports X-type flying Quad-copter (GAUI 330X, 500X, etc…).
OSD (On-screen display, optional purchase module) electronics can be connected to GU-INS, which provides precise data monitoring on altitude, distance, position, attitude and battery voltage.
Onboard USB interface connector for firmware updates.
Interface provided to connect with standard receiver and JR satellite receiver.
1.DimensionsMain controller: 53.5 x 38.5 x 12mm GPS antenna: 42 x 34 x 15mm WeightMain controller: 27g (w/o cables ), GPS antenna: 23g (with cable)
2.Frequency: 400Hz output to ESC
3.Operating temperature: -20~80°C
4.Operating modes: Rate (manual) mode, Auto balance mode, GPS positioning mode.
5.Rate (manual) mode: Max angular velocity: 300 degree/sec
6.Auto balance mode: Max tilt angle: 60 degree.
7.GPS positioning mode:
a.Hovering accuracy: Horizontal: ±1m, Vertical: ±0.5m
b.Max yaw angular velocity: 250 degree/sec
c.Max tilt angle: 45 degree.
d.Max horizontal speed: 10 m/s36 km/hr
e.Max vertical speed: 8 m/s (horizontal posture)
8.GU-INS provides pitch and rolls output signals, can work with different types of camera mounts.
9.Fail-safe functions: Automatic Go-Home, Signal lost Go-Home, Low voltage protection.
10.Suitable wind condition: < 10 m/s
1.Easy to install and setup, no need of software on PC for adjustment.
2.All functions can be setup & confirmed by LED lights indication.
3.All in one design (combined inertial measurement unit and main controller) with simple cable wiring.
Write an online review and share your thoughts with other shoppers!
Standard UK Mainland 1-3 days delivery is FREE
Standard EU delivery cost is £24.99
Standard US delivery cost is £49.99
Standard Worldwide delivery cost is £79.99
Ready To Fly Helicopters Delivery & Build 5 - 10